Kestrel 4300 Construction Weather Tracker

Kestrel 4300 Construction Weather Tracker

Parameters Measured

Evaporation rate, Current wind speed, average wind speed, maximum wind gust, temperature, wind chill, relative humidity, heat stress index, dewpoint temperature, barometric pressure, altitude, wet bulb temperature, density altitude.

Improve results when doing surface coating and concrete pouring with the Kestrel 4300 Construction Weather Tracker.

For years construction professionals have been using Kestrel Meters to monitor the weather on the job site. Now NK has partnered with industry experts to develop a customised Kestrel instrument for construction professionals who place concrete.

The new Kestrel 4300 Construction Weather Tracker measures and displays evaporation rate — a function of relative humidity, temperature and wind speed. Evaporation rate is a critical environmental indicator that concrete contractors use to ensure they avoid plastic shrinkage cracks in concrete installations especially concrete flatwork. Plastic shrinkage cracks occur when the surface of the concrete dries too quickly and shrinks before the bed has cured enough to resist cracking. This is especially relevant in specialty applications like decorative concrete, Ready Mix Concrete (RCM) and Tilt-up concrete.

Plastic shrinkage cracks can be prevented by properly assessing the weather and the fresh concrete conditions. Previously, construction contractors used a Kestrel Meter to measure the relevant conditions, then referenced an American Concrete Institute chart to calculate the evaporation rate. The new Kestrel 4300 Construction Weather Tracker does the work for them! The user simply enters the concrete temperature (obtained via an infrared thermometer or probe thermometer*) and the 4300 calculates the evaporation rate instantly. In addition to evaporation rate, the Kestrel 4300 remains the perfect rugged all-purpose construction weather tool, measuring and logging the following relevant weather conditions right where the workers and equipment are operating.

For maximum accuracy when measuring the evaporation rate:

 1. Measure the concrete temperature via an infrared or probe thermometer
 2. Enter the concrete temperature into the Kestrel
 3. Position the unit facing into the wind, 20 inches above the concrete
 4. Shade the Kestrel's thermistor (temperature sensor) so it is not in direct sunlight

For the best accuracy, use the Kestrel's convenient averaging mode to average the evaporation rate over the recommended 6-10 seconds.

Many construction applications require documentation of conditions, which is quick and easy with the Kestrel PC Interface and accompanying software. Use the 4300's 1800 data-point log to document that work was done during the appropriate conditions, then upload the data to a PC with the Kestrel PC Interface. The Kestrel Communicator software makes long-term storage, in-depth analysis and detailed charting of stored data a breeze.

Kestrel's Mini Tripod is a great companion for the 4300—it measures 15 inches tall, positioning the Kestrel 4300 20 inches above the concrete, which is ideal for measuring the conditions that contribute to plastic shrinkage cracks.

Every Kestrel is individually calibrated to NIST-traceable standards and comes with a free Certificate of Conformity (Individual NIST certificates and recalibration are also available).

If your application demands regular calibration, simply pop in a new impeller and the Kestrel air velocity meter is restored to like-new factory calibration standards.


  • Soft carry pouch
  • Neck lanyard 
  • Batteries - (2AAA)
  • Kestrel Certificate of Conformity

Available Accessories

  • Computer interface and communicator software
  • Nylon carry case
  • Replacement impeller
  • Portable vane mount
  • Tripod 
  • Stainless Steel mounting bracket 
  • RH calibration kit

Brochure Downloads

For more information please download the Kestrel 4300 Construction Weather Tracker brochure.

Product Enquiry